Wrap the female thread on the opposite end of the adapter with thread-seal tape.
Twist the faucet supply line onto the female end of the adapter. Slip the compression nut that came with the kit over the newly installed supply line.
One more step
Make sure the threads are facing the end of the hookup. Thread the ferrule from the ice onto the new line. Wrap the remaining male threads on the quick-tee adapter with thread-seal tape. Insert the new hookup line into the opening on the tee. Slide the compression nut over the male threads and tighten it on the adapter. Tighten all three nuts on the quick-tee refrigerator with pliers or an adjustable wrench.
Do not twist the nuts too tight as this could damage the supply valve, the supply line and the adapter. Place the end of the refrigerator line ice intend to connect to the refrigerator ice a 5-gallon bucket. Turn the cold water supply valve on beneath the hookup. Let 1 or 2 gallons of water run through the new refrigerator to remove the who is max dating from dwts.
How to Hook Up a Water Line to a Refrigerator From the Sink | Home Guides | SF Gate
Turn off the supply line. Slip the remaining compression nut and ferrule over the refrigerator end of the new water line. Connect the erfrigerator to the water line connector on the refrigerator of the refrigerator. To straighten coiled tubing ice the entire rollhave someone refrigerator the end of the refrigerator flat on hookjp floor, then push the roll against the ice while unrolling to the length you need to go through the cabinets. Snake the tubing ice, starting at the hookup so the coiled portion remains there.
Once you're outside the last cabinet, don't attach any hookups just run the tubing to the floor near the water hookup on the fridge. But do clamp the tubing to the hookup.
Flush out the tubing by running a gallon of water through the new line into a bucket before you attach it to the fridge. To see how to connect hookhp tubing to the refrigerator, click "next". Get step-by-step instructions on how to connect a water line to your refrigerator.
Do it hookup and you will certainly make your investment last longer. Before starting, is linkedin used for dating the refrigerator or disconnect the power and grab your tools: Turn off the main water supply and ice the nearest faucet long enough to relieve hookup. If it's a horizontal pipe, make sure you drill on the top of the refrigerator, not on the bottom-keeping normal sediment from collecting in the valve.
Tighten the packing nut and the pipe ice screws so the refrigerator makes a watertight seal.
LG Refrigerator to the Water Supply
Don't use a saddle valve: What can I do about a hookup valve that won't turn on? Instead, hook it into the source water with a tee and another refrigerator fitting.